manualshive.com logo in svg

Kyocera ECOSYS FS-2020D, Operation Manual, Page: 102 / 219

Share
Download
Kyocera ECOSYS FS-2020D Operation Manual Download Page 102

7-2

Using the Operation Panel

General Information

This chapter provides the information you need to configure the Ecosys 
printer. In general you need to use the operation panel only to make 
default settings. You can make most changes to the printer settings 
using the printer driver through the application software.

You can also access the printer's various settings from a remote 
location, by using the control panel, the printer driver or other utilities 
such as the Status Monitor Utility. Other printer utilities can be installed 
using the CD-ROM supplied with the printer.

The chapter describes the operation panel in detail, including its menus 
and the procedures for changing various printer settings.

Note

Changes to printer settings made using a software 

application override changes made using the operation panel.

Summary of Contents for ECOSYS FS-2020D




























































































































































































































Reviews:

No comments