Kyocera ECOSYS FS-2020D, Operation Manual, Page: 146 / 219

7-46 Using the Operation Panel
4
Select the print density from five steps from
01
(light) to
05
(dark)
using the U or V .
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Page Set (Setting pagination)
In Page Set menus, you can set the number of copies, page orientation,
and other settings regarding pagination.
The options available in Page Set are as follows:
• Copies (Number of copies)
• Orientation (Print orientation)
• LF Action (Linefeed)
• CR Action (Carriage-Return)
• Wide A4 (Wide A4 pitch)
1
Press Z while
Print Settings >
is displayed.
2
Press U or V repeatedly until
>Page Set >
appears.
Copies (Number of copies)
You can set the number of copies of each page to be printed.
1
Press
Z
while >Page Set > is displayed.
2
Press U or V repeatedly until
>>Copies
appears.
3
Press [OK] . A blinking cursor (
_
) appears.
4
Press U or V to increase or decrease, respectively, the value at the
blinking cursor. The number of copies can be set between
1
and
999
. Use Y and Z to move the cursor right and left.
5
When the desired size is displayed, press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Zoom (Reduce print)
You can print with the reduced size. This menu is used to set the source
paper size and the paper size to use after reduction.
>Page Set >
>>Copies
001
Note Printed results when making reductions differ from
equivalent size printing. Sometimes the line width of characters
may not be consistent or lines may appear in figures or image
patterns. Also, thin lines may not be reproduced on the reduced
print.
In the reduction mode, printed barcodes may not be read.