Kyocera ECOSYS FS-2020D, Operation Manual

Page: 105 / 219

Using the Operation Panel 7-5
Indicators in Message Display
Ready, Data, and Attention Indicators
The following indicators light during normal operation and whenever the
printer needs attention. Depending on the status of lighting, each
indicator has the following meaning:
Ready
Indicator Description
Flashing . Indicates an error that you can resolve. Refer to
Troubleshooting section in the Operation Guide .
On . Indicates that the printer is ready. The printer prints the
data it receives.
Off . [ Cancel ] was pressed during Ready is displayed.
Data can be received but will not be printed. To resume
printing, press [
Cancel ] again.
Printing is cancelling.
Also, indicates when paper jam occurred, toner has run
out, cover is open, and so on. For details, refer to the
Troubleshooting section in the Operation Guide.
Flashing. Indicates that a data is being received.
On. Indicates either that data received is being processed
before printing starts, or that data received is being written
to or read from a CompactFlash card, hard disk, RAM disk,
or USB flash memory.
Flashing. Indicates that the printer is ready to print when
Please wait
is displayed. Also indicates that the
corresponding paper cassette is not installed.
Indicates that the printer requires maintenance such as
adding paper, cleaning the printer, replacement of
maintenance kit, preparing the toner container, formatting
of hard disk and CF card.
On. Indicates when paper jam occurred, toner has run out,
cover is open, and so on. If the message includes
Press
GO
, press [ GO ] to resume printing.
The ID or Password entered for the Security, Administrator,
or Job Accounting function is not correct. Check the ID or
Password, and enter the correct ID or password.