Kyocera ECOSYS FS-2020D Operation Manual Download

Page: 74 / 219

4-24

Connecting and Printing

Uninstalling Software (Windows PC)

The software can be uninstalled (removed) using the CD-ROM (Product
Library) supplied with the printer.

Exit all active software applications.

Insert the enclosed CD-ROM (Product Library) into the CD-ROM
drive.

Following the procedure used to install the printer driver, click

Remove Software

. The Kyocera Uninstaller wizard appears.

Select the software package to remove.

Click Uninstall.

The uninstaller starts.

When Uninstall complete screen appears, click

Next

Select whether you restart your computer or not, click

Finish

IMPORTANT

On Macintosh computers, because the printer settings

are specified using a PPD (PostScript Printer Description) file, the
software cannot be uninstalled using the CD-ROM (Product Library).

Note

In Windows Vista, Remove Driver and Package screen

appears. Select

Remove driver and driver package

, and

click

Summary of Contents for ECOSYS FS-2020D




























































































































































































































Search results

Summary of Contents for ECOSYS FS-2020D

Reviews:

Related manuals for ECOSYS FS-2020D

Brands by name

Popular brands

Kyocera ECOSYS FS-2020D, Operation Manual

Search results

Summary of Contents for ECOSYS FS-2020D

Reviews:

Related manuals for ECOSYS FS-2020D

Brands by name

Popular brands