manualshive.com logo in svg

Kyocera ECOSYS FS-2020D, Operation Manual, Page: 63 / 219

Share
Download
Kyocera ECOSYS FS-2020D Operation Manual Download Page 63

Connecting and Printing

4-13

Installing the Printer Driver

According to the instructions of the Installation Guide, connect the PC to 
the printer and turn on them to install the printer driver. 

For more 

information on printer driver, refer to the 

KX Driver User Guide

 in the CD-

ROM.

Installing the Printer Driver on Windows PC

This section explains how to install the printer driver in Windows Vista

.

1

Ensure the printer is plugged in and connected to the computer's 
USB or Network port before installing software from the CD-ROM.

2

Insert the CD-ROM (Product Library) into the CD-ROM drive. If 

AutoPlay

 screen appears, click 

Run Setup.exe

. The Notice screen 

appears.

3

Select 

View License Agreement

 to read the information and select 

Accept

 to proceed.

4

Click 

Install Software

. Installation Method screen appears.

5

Select Express Mode or Custom Mode as the installation method.

•

Express Mode: If the printer is connected via USB or a network and 
is turned on, the installer detects the printer. Select Express Mode to 
perform a standard installation.

Note

To install the printer driver, you must log on with 

administrator privilege.

Note

If a Plug and Play window like that shown at left 

appears, click 

Cancel

. 

Note

If the installation program fails to launch, use Windows 

Explorer to access the CD-ROM and select Setup.exe. 

Note

In Windows XP, click 

Install Software

 to start the 

Installation wizard. Click 

Next

 to display the Installation 

Method screen.

Summary of Contents for ECOSYS FS-2020D




























































































































































































































Reviews:

No comments