Kyocera ECOSYS FS-2020D, Operation Manual

Page: 138 / 219

7-38 Using the Operation Panel
4
Press U or V to display the desired binding mode. The message
display toggles through the following:
Off (default)
Short edge bind
Long edge bind
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Paper Output (Selecting the output stack)
The Paper Output menu on the operation panel allows you to select
either the face-down tray or the faceup tray option for the output stack.
1
Press Z while
Print Settings >
is displayed.
2
Press U or V repeatedly until
>Paper Output
appears.
3
To change the output stack, press [OK] . A blinking question mark (
?
)
appears.
4
Press U or V to select output stack -
Top tray FaceDn
or
RearTray FaceUp
.
5
When the desired output stack is displayed, press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Override A4/LT (Overriding difference between A4
and Letter)
When the
Override A4/LT
is turned
On
using the operation panel, the
printer ignores the difference between A4 and Letter paper sizes.
Printing is performed without an error message even if the actual paper
size in the current cassette differs from the paper size formatting the job.
By default, this feature is
On
.
1
Press
Z
while
Print Settings >
is displayed.
2
Press U or V repeatedly until
>Override A4/LT
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Select
On
or
Off
using U or V .
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Emulation (Setting the emulation)
You can change the emulation mode. Use the procedure below to select
the mode.
1
Press
Z
while
Print Settings >
is displayed.
Note This menu can be used for FS-3920DN and FS-4020DN.
>Paper Output
Top tray FaceDn
>Paper Output
?Top tray FaceDn
>Override A4/LT
? On