Personal Settings
197
If you fail to enter the correct password after five attempts, you will be prompted to wait for 30
seconds before you can try again.
Important
: To protect your phone and data from unauthorized access, it is recommended that you use
the screen unlock password (highest security). It is also recommended that you frequently change your
password to ensure the safety of your phone and personal data.
Use Fingerprint
Enabling this option requires you to touch the fingerprint sensor to unlock the screen.
Note:
Please remove the USB cable prior to registering your fingerprint for authentication.
Note:
If you fail fingerprint authentication five times, input your backup PIN, pattern, or password.
Note:
Fingerprint cannot be used to unlock the screen after restarting the phone. You must use your
backup method, such as pattern, PIN, or password.
Note:
The fingerprint sensor is on the Power key. Before using the Fingerprint sensor, make sure the
Power key and your finger are clean and dry.
Note:
The fingerprint recognition performance depends on your usage. The phone may have an issue in
registering or recognizing fingerprints that have scars or worn down ridges, or if you have scratches on
the sensor surface.
Tip:
To improve fingerprint recognition performance, register the fingerprints that are used most often to
perform tasks on the phone.
1. From home, tap
Apps
>
Settings
>
Lock screen
>
Fingerprint
.
2. Read the message and tap
CONTINUE
.
3. Select your backup screen lock method.
4. Read the message and tap
CONTINUE
.
5. Draw your unlock screen pattern, enter your PIN, or enter your password.
6. Read the message and tap
NEXT
.
7. Touch the ball of your finger on the sensor and lift after you feel a vibration. Repeat it 20 times.
8. If required, name the fingerprint and tap
DONE
.
Note:
Fingerprint authentication technology does not guarantee completely accurate personal
authentication and identification. Kyocera assumes no responsibility for any damages resulting from using
your device by the third party or inability to use your device.
Disable the Screen Lock
Follow the instructions below to turn off your current screen lock.
1. From home, tap
Apps
>
Settings
>
Lock screen
.
Summary of Contents for DuraForce PRO
Page 1: ...DuraForce PRO User Guide UG template version 16a Kyocera_DuraForce PRO_ug_en_160905_d1 ...
Page 222: ...System Settings 213 For details about updating your phone see Update Your Phone ...
Page 239: ...For Assistance 230 microSD microSDHC and microSDXC Logos are trademarks of SD 3C LLC ...