Transmitting/Editing Machine Setting File (Environment Setup)
10-44
5.
Edit the machine setting file.
The machine setting file transmitted to a PC is a TAB separated text data which can
be edited using an application software such as Text Editor or Table Editor. A new
setting file can also be created according to the specifications for each file type.
See p. 10-45 for details.
6.
Import the machine setting file.
Click on [
Browse...
] to designate the machine setting file to be imported, then click
on [
Import.
].
The result message will be displayed when the registration is completed.
DETAILS: Error Message
If the registration cannot be completed successfully, an error messages
will be displayed as follows.
• Can’t transfer data (The machine is busy)
Try again to import the data after the machine operation in progress is
completed.
• The data cannot be recognized
Check if the data surely is the machine setting file.
• Data size is too large
Check if the data surely is the machine setting file.
Check if the file size exceeds 100,000 byte.
• The data cannot be registered
Check if inappropriate description is made in the machine setting file.
See p. 10-45 for details.
Check if the file entries are already over the limit.
