7-14
Output Z-Folded Copies (Z-Folding)
The Z-Folding mode is available only when PZ-108 Punching/Z-Folding unit option is
installed on the DF-630/DF-635 Finisher.
When the Z-Folding mode is selected in combination with any of the Primary (main)
tray output modes, the original image is copied on 11”x17”/8.5”x14” copy paper and
output to the Primary (main) tray of the Finisher according to the selected output mode.
>>>Specifications for Z-Folding Mode<<<
❒
Folding type:Z-folding (11”x17”), double-folding (8.5"x14")
❒
Copy paper size: 11”x17”, 8.5"x14" (16 ~ 24 lb paper)
All other paper sizes will be output without Z-fold or double-fold.
❒
Folded width*: 215 mm or less for 11”x17”
261.6 mm or less for 8.5"x14"
*The width from the paper edge to the first folded line
❒
When using Mixed Original mode with Z-Folding mode, 11”x17” and 8.5"x14"
originals should not be mixed, otherwise the Z-Folding mode may not function
properly.
❒
Special paper type (Thick 2, OHP film, labels, tabbed sheets) and non-standard
size (STD size (special), Non STD size, Wide paper) cannot be Z-folded. Using
special paper willl cause the machine trouble.
Some plain paper types may cause folded line to shift in Z-Folding mode.
❒
Incompatible Conditions: Using platen glass (available when platen memory copy
is selected), Staple-sort using 8.5"x14", Output to Secondary (sub) tray, Folding,
Stapling & Folding, Trimming, Tandem mode, Transparency Interleave
❒
When using Z-folding, Staple-sort and APS for mixed size originals, heed the
following limits on capacity:
1 sheet
2
3
4
5
6 or more
1 ~ 40 sheets
0 ~ 30
0 ~ 20
0 ~ 10
0
20 stapled sets
10
4
3
2
Primary Tray Capacity
Capacity for one stapled set
Number of Z-folded sheets
Number of regular sheets
Staple-Sort is unavailable with Z-Folding.
Capacity for Mixed Size Originals
using Z-Folding and Staple-Sort with APS
