Programming Different Settings for an Output Job (Program Job) (continued)
9-28
8.
Repeat steps
4
to
7
until all JOB originals are scanned.
Reminder!
PLACE AND SCAN EACH ORIGINAL SET IN THE CORRECT ORDER
OF PAGINATION.
HINTS
• Memory overflow may occur during scanning. See p. 5-11 to p. 5-12.
• Should memory overflow occur frequently, it is recommended that you
contact your service representative to extend the memory capacity in
your machine.
9.
Select the desired output mode and enter the print quantity from the
control panel keypad.
HINT
See p. 3-7 for details on setting print quantity.
10.
Touch
STORE
to exit the Store mode.
11.
Press [
START
].
CAUTION
When the finisher / paper exit tray capacity is exceeded due to
the print quantity selected, remove the copied sets as they
exit; otherwise, mishandled paper will occur.
