KYMCO Downtown 300i ABS, Service Manual

Page: 6 / 263

1. GENERAL INFORMATION
1-3
Downtown 300i ABS
SERVICE PRECAUTIONS

Make sure to install new gaskets, O-rings,
circlips, cotter pins, etc. when
reassembling.

When tightening bolts or nuts, begin with
larger-diameter to smaller ones at several
times, and tighten to the specified torque
diagonally.

Use genuine parts and lubricants.

When servicing the motorcycle, be sure to
use special tools for removal and
installation.

After disassembly, clean removed parts.
Lubricate sliding surfaces with engine oil
before reassembly.

Apply or add designated greases and
lubricants to the specified lubrication
points.

When two persons work together, pay
attention to the mutual working safety.

Disconnect the battery negative (-)
terminal before operation.

When using a spanner or other tools,
make sure not to damage the motorcycle
surface.

After operation, check all connecting
points, fasteners, and lines for proper
connection and installation.

When connecting the battery, the
positive (+) terminal must be connected
first.

After connection, apply grease to the
battery terminals.

Terminal caps shall be installed securely.