Kübler SMC1.3, Safety Manual

Page: 140 / 235

R60047.0002 - Index 2 EN – page 20 / 115
5.4.2 Control outputs CONTROL IN 2
The following functions and configuration options are available on the terminal strip
[X24 | CONTROL IN 2]:
•
Two 2-pole inputs (IN3, /IN3 und IN4, /IN4)
Signalpair 1
[X24: 2] IN3 Control signal 5, fault detection
[X24: 3] /IN3 Homogeneous or inverse control signal 5, fault
detection
Signalpair 2
[X24: 4] IN4 Control signal 6, fault detection
[X24: 5] /IN4 Homogeneous or inverse control signal 6
•
One 2-pole input (IN3, /IN3) and ztwo 1-pole inputs (IN4 and /IN4)
Signalpair 1
[X24: 2] IN3
Control signal 5, fault detection
[X24: 3] /IN3 Homogeneous or inverse control signal 5
Signal 2 [X24: 4] IN4 Control signal 6
Signal 3 [X24: 5] /IN4 Control signal 7
• Four 1-pole inputs (IN3, /IN3, IN4 and /IN4)
Signal 1 [X24: 2] IN3 Control signal 5
Signal 2 [X24: 3] /IN3 Control signal 6
Signal 3 [X24: 4] IN4 Control signal 7
Signal 4 [X24: 5] /IN4 Control signal 8
•
One 4-pole input (IN3, /IN3, IN4 and /IN4)
Signal 1 - 4 [X24: 2-5]
Signals in gray (4 states with error detection) or
binary format (16 states without error detection)
for switching the switching points
•
The use of 1-pole inputs reduces the Safety Integrity Level (SIL) or
the Performance Level (PL).
•
The use of 16 switching points reduces the Safety Integrity Level
(SIL) or the Performance Level (PL).