manualshive.com logo in svg

Krone X-Disc 620, Original Operating Instructions, Page: 82 / 86

Share
Download
Krone X-Disc 620 Original Operating Instructions Download Page 82

Before the Start of the New Season

 

 

82 

 

Pos: 62.9 /Überschriften/Überschriften 2/P-T/Probelauf @ 0\mod_1196782963921_78.docx @ 14908 @ 2 @ 1 

 

13.2 

Test run.  

Pos: 62.10 /BA/Sicherheit/7. Gefahrenhinweise alt/Mähwerke/Gefahr - Probelauf Einzahl Maschine muss auf Boden aufliegen @ 13\mod_1225454023333_78.docx @ 156407 @  @ 1 

 

 

Danger! - Testing the machine after repair, maintenance or cleaning work and after 
technical intervention. 

Effect: Danger to life or serious injuries 
• 

The machine must be in working position 

• 

Do not switch on the drives until the machine is resting on the ground and you are 
absolutely sure that neither persons, animals nor objects are in the danger zone. 

• 

Start a trial run of the machine from the driver’s seat only. 

 

Pos: 62.11 /BA/Einlagerung/EasyCut / AM Mähwerke/Vor der Saison ohne Bereifung @ 3\mod_1204731533226_78.docx @ 72767 @  @ 1 

 

• 

Lubricate the machine thoroughly. Remove any condensation water which may have 
collected in the bearings.

 

• 

Check oil level in the gearbox(es) and top up if necessary. 

• 

Check all screws to make certain they are tight or retighten them if necessary. 

• 

Check all electrical connection cables and the lighting. Repair or replace if necessary. 

• 

Check the entire setting of the machine and correct if necessary. 

• 

Re-read the operating instructions thoroughly.

 

 

 

Note 

Use vegetable oils and greases. 

 

Pos: 63 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for X-Disc 620























































































Reviews:

No comments