manualshive.com logo in svg

Krone X-Disc 620, Original Operating Instructions, Page: 33 / 86

Share
Download
Krone X-Disc 620 Original Operating Instructions Download Page 33

 

Commissioning

 

33 

 

Pos: 45.14 /Überschriften/Überschriften 2/K-O/Maschine an den Feldhäcksler BiG X 480/580 anpassen @ 178\mod_1374046400044_78.docx @ 1524690 @ 2 @ 1 

 

5.5 

Adjusting machine to the forage harvester BiG X 480/580  

Pos: 45.15 /BA/Inbetriebnahme/Vorsätze/Adapterrahmen/Hinweis Erstanbau und Wechsel Verriegelungsbleche und Getriebe anpassen @ 163\mod_1366032240292_78.docx @ 1423761 @  @ 1 

 

 

 

 

 

 

 

Note 

When mounting the machine the first time on a forage harvester as well as each time a forage 
harvester is changed, the position of the locking plates as well as of the coupling disc must be 
checked and adapted, if necessary. 

 

Pos: 45.16 /BA/Sicherheit/Transportwagen/Achtung Ankuppeln @ 5\mod_1214207864310_78.docx @ 91932 @  @ 1 

 

 

Danger! - Coupling 

Effect: Danger to life or serious injuries. 
When making the coupling, ensure there is no one between the forage harvester and the 
machine. 

 

Pos: 45.17 /Überschriften/Zwischenüberschriften/K-OKupplungsscheibe reinigen @ 258\mod_1398412317227_78.docx @ 1976199 @  @ 1 

 

Cleaning the coupling disc 

Pos: 45.18 /BA/Inbetriebnahme/Vorsätze/Pendelrahmen/Kupplungsscheibe reinigen Bild BiG X 480/580__X-Disc 620 @ 336\mod_1429871316858_78.docx @ 2557003 @  @ 1 

 

GPS00037

1

2

Fig. 6 

Pos: 45.19 /BA/Inbetriebnahme/Vorsätze/Pendelrahmen/Kupplungsscheibe reinigen BiG X 480/580 @ 163\mod_1366099680036_78.docx @ 1425192 @  @ 1 

 

To prepare the coupling for attachment of the front attachment: 
• 

Clean the coupling disc (1) on the front attachment and lubricate the coupling surfaces with 
multi-purpose grease. 

• 

Clean the coupling journal (2) on the forage harvester and lubricate the coupling surfaces 
with multi-purpose grease. 

Pos: 45.20 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for X-Disc 620























































































Reviews:

No comments