manualshive.com logo in svg

Krone X-Disc 620, Original Operating Instructions, Page: 34 / 86

Share
Download
Krone X-Disc 620 Original Operating Instructions Download Page 34

Commissioning

 

 

34 

 

Pos: 45.21 /Überschriften/Überschriften 3/U-Z/Verriegelungsbleche einstellen @ 178\mod_1374046543249_78.docx @ 1524723 @ 3 @ 1 

 

5.5.1 

Adjusting the locking plates  

Pos: 45.22 /BA/Inbetriebnahme/Vorsätze/Adapterrahmen/Hinweis Einstellungen an den Verriegelungsblechen rechts und links gleich ausführen @ 163\mod_1366032305295_78.docx @ 1423790 @  @ 1 

 

 

 

 

 

 

 

 

 

 

 

Note 

Set the locking plates the same on the right and on the left. 

 

Pos: 45.23 /BA/Inbetriebnahme/Vorsätze/Adapterrahmen/Verriegelungsbleche einstellen T1 Bild X-Disc 620 @ 336\mod_1430122224190_78.docx @ 2557601 @  @ 1 

 

EFL000046_2

1

2

3

Fig. 7 

Pos: 45.24 /BA/Inbetriebnahme/Vorsätze/Adapterrahmen/Verriegelungsbleche einstellen Einführsatz BiG X 480/580 @ 163\mod_1366111950543_78.docx @ 1426040 @  @ 1 

 

To set the locking plates (4): 

Pos: 45.25 /BA/Inbetriebnahme/Vorsätze/Pendelrahmen/Verriegelungsbleche einstellen BiG X 480/580 Text @ 261\mod_1399383846558_78.docx @ 1991292 @  @ 1 

 

• 

Lower the feed drive (1) of the forage harvester all the way. 

• 

Align the pendulum tube (2) horizontally on the feed drive. 

Pos: 45.26 /BA/Inbetriebnahme/Vorsätze/Pendelrahmen/Verriegelungsbleche einstelle:n Schrauben lösen EasyFlow 300 S @ 262\mod_1399963851761_78.docx @ 2001947 @  @ 1 

 

• 

Loosen the screw connections (5, 6) on the front attachment. 

Pos: 45.27 /Layout Module /----------------Leerzeile-------------------- @ 240\mod_1395147357027_0.docx @ 1890988 @  @ 1 

 

 

Pos: 45.28 /BA/Inbetriebnahme/Vorsätze/Adapterrahmen/Verriegelungsbleche einstellen T2 Bild X-Disc 620 @ 336\mod_1430119630256_78.docx @ 2557377 @  @ 1 

 

GPS00045

1

2

GPS00046

4

3

7

5

6

Fig. 8 

Pos: 45.29 /BA/Inbetriebnahme/Vorsätze/Ankuppeln/Ankuppeln BiG X 480/580 EasyFlow 300 S Text @ 275\mod_1404720476642_78.docx @ 2070587 @  @ 1 

 

• 

Drive the forage harvester up to the machine until the roll guides (1) are under the support 
chute (2). 

• 

Release the locking pins (3), see the operating instructions for the forage harvester. 

• 

Raise the adapter frame using the lifting hydraulics until the roll guides raise the front 
attachment with the support chute. 

Pos: 45.30 /BA/Inbetriebnahme/Vorsätze/Adapterrahmen/Verriegelungsbleche einstellen T1 X-Disc 620 @ 338\mod_1430733718292_78.docx @ 2564289 @  @ 1 

 

• 

Ensure that the pendulum tube (6) of the forage harvester rests against the contact area (7) 
of the header. 

Pos: 45.31 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for X-Disc 620























































































Reviews:

No comments