Start-up
39
Pos: 47.1 /Überschriften/Überschriften 1/F-J/Inbetriebnahme @ 0\mod_1196327075811_78.docx @ 6375 @ 1 @ 1
6 Start-up
Pos: 47.2 /BA/Sicherheit/6. Überarbeitete Warnhinweise/An-/ Abbau/Gefahr - An-/ Abbau und Bedienung X-Disc 6200 @ 12\mod_1224667322828_78.docx @ 152373 @ @ 1
DANGER! – Attaching / removing and operating the machine
Effect: Danger to life or serious injuries.
•
The machine may only be attached to the forage harvester for which it is intended!
•
Use extreme caution when attaching the machine to or detaching it from the forage
harvester! The accident prevention regulations must be complied with absolutely.
•
The machine is suitable for and intended for cutting crops growing on the ground!
•
Maintain an adequate safety distance from the cutting tools during operation.
•
The glide skids must rest on the ground before start-up and during work!
•
Stones and other objects may be hurled up, even when the machine is used as intended.
For this reason, no one is permitted in the danger zone. Special care should be taken when
working near roads and buildings.
•
Check the guard cloths regularly. Worn or damaged guard cloths must be replaced!
•
The protective equipment on the machine, e.g. cloths and hoods, protects against flying
stones and similar objects, and prevents access to hazardous areas. For this reason you
must always move them to their protective position before starting work.
•
Do not enter the area between the forage harvester and the machine while the machine is
being converted from the transport to the working position and vice versa.
Pos: 47.3 /BA/Inbetriebnahme/Vorsätze/X-Disc 6200/Vor Inbetriebnahme prüfen und beachten @ 140\mod_1355124788904_78.docx @ 1244100 @ 2 @ 1
6.1
Checking and Observing Before Start-Up
•
Check the oil level in the gearboxes.
•
Lubricate the front attachment thoroughly before start-up.
•
Check the screws for firm attachment.
•
Check the cutter blades for damage and to make certain they are correctly seated.
•
Check the tension of the drive chain(s).
•
Completely install the protective equipments and lock them.
•
Adapt the adapter frame of the front attachment to the pendulum frame of the forage
harvester.
•
Lock the pendulum frame of the forage harvester.
•
Align the cutting system.
•
Before starting to move, make certain there are no loose parts on the vehicle. Parts that
could get lost during movement must be attached or covered.
•
Keep persons out of the danger zone. If persons do approach the danger zone, please turn
off the machine immediately.
•
Never allow the machine to run unsupervised.
Pos: 47.4 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1