Settings
51
Pos: 55.10 /BA/Einstellungen/Vorsätze/Bodenkufe einstellen @ 93\mod_1327663787338_78.docx @ 791374 @ 3 @ 1
9.1.1
Set Ground Skid
Note
The height of the skids must be adapted to the tyre size of the forage harvester in that way that
the skids in the rear skid area are still resting evenly on the ground.
The position of the ground skid does not influence the cutting height. Adjust all skids equally.
1
GPS00028
I
2
Fig. 24
•
Lift the front attachment
•
Take note of the danger warnings at the beginning of the chapter
•
Loosen screw connections (2) and assemble the ground skid (1) in the desired position (I)
•
Tighten screw connections
Pos: 55.11 /Layout Module /----------------Leerzeile-------------------- @ 240\mod_1395147357027_0.docx @ 1890988 @ @ 1
Pos: 55.12 /Überschriften/Überschriften 2/A-E/Einweisbleche einstellen @ 338\mod_1430740186754_78.docx @ 2564690 @ 2 @ 1
9.2
Setting Infeed Sheets
Pos: 55.13 /BA/Einstellungen/Vorsätze/Einweisbleche einstellen Bild @ 338\mod_1430740471501_78.docx @ 2564723 @ @ 1
Fig. 25
Pos: 55.14 /BA/Einstellungen/Vorsätze/Einweisbleche einstellen Text @ 338\mod_1430740497475_78.docx @ 2564754 @ @ 1
When harvesting short crop, it may be useful to mount the infeed sheets (1) further outside on
the auger conveyor to optimise crop flow.
•
Unscrew screws (2).
•
Move infeed sheets (1) by one hole pattern to the outside.
•
Mount and tighten screws (2).
Pos: 56 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1