Krone X-Disc 620 Original Operating Instructions Download Page 30

Page: 30 / 86

Machine Description

Pos: 38 /BA/Einleitung/Technische Daten/Technische Daten mit 2. Überschrift @ 0\mod_1195566374865_78.docx @ 594 @ 2 @ 1

4.6 Technical

data

All information, illustrations and technical data in these operating instructions correspond to the
latest state at the time of publication. We reserve the right to make design changes at any time
and without notification of reasons.

Pos: 39 /BA/Einleitung/Technische Daten/Vorsätze/Technische Daten: Abmessungen X-Disc 620 @ 328\mod_1426576296733_78.docx @ 2512815 @ @ 1

Type

X-Disc 620

Working width

[mm]

6200

Number of mower drums (low)

Number of mower drums (high)

Drive speed

[rpm]

750

Dead weight

[kg]

2800

Pos: 40 /Überschriften/Überschriften 2/P-T/Schmierstoffe @ 17\mod_1236177314933_78.docx @ 201837 @ 2 @ 1

4.7 Lubricants

Pos: 41 /Überschriften/Überschriften 3/F-J/Füllmengen und Schmiermittelbezeichnungen der Getriebe @ 33\mod_1254230622207_78.docx @ 318675 @ 3 @ 1

4.7.1

Filling Quantities and Lubrication Designations for Gearboxes

Pos: 42 /BA/Wartung/Umwelt/Hinweis Umwelt Betriebsstoffe entsorgen und lagern @ 313\mod_1421247863386_78.docx @ 2418631 @ @ 1

Environment! - Disposing of consumables and storage

Effect: Environmental damage
•

Keep consumables in suitable containers according to statutory provisions.

•

Dispose of used consumables according to statutory provisions.

Pos: 43 /BA/Einleitung/Technische Daten/Vorsätze/Technische Daten Betriebsstoffe X-Disc 6200 @ 140\mod_1355144481615_78.docx @ 1244934 @ @ 1

Lubricants

Filling

quantity

[litres]

Filtered lubricants

Bio-degradable
lubricants

L corner gearbox

2.9

PAO Mobil SHC 630

On request

Main angular gearbox

1.7

API GL4 SAE 90

Cutter bar drive gear

0.55

Cutter bar

Pos: 44 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Summary of Contents for X-Disc 620























































































Search results

Summary of Contents for X-Disc 620

Reviews:

Krone X-Disc 620, Original Operating Instructions, Page: 30 / 86

Search results

Summary of Contents for X-Disc 620

Reviews: