Maintenance – lubrication chart
78
Pos: 59.35.1 /Überschriften/Überschriften 1/U-Z/Wartung - Schmierplan @ 0\mod_1197359304198_78.docx @ 18232 @ 1 @ 1
11
Maintenance – lubrication chart
Pos: 59.35.2 /Überschriften/Überschriften 2/P-T/Spezielle Sicherheitshinweise @ 0\mod_1196660495760_78.docx @ 9134 @ 2 @ 1
11.1
Special Safety Instructions
Pos: 59.35.3 /BA/Sicherheit/7. Gefahrenhinweise alt/Vorsätze/Gefahr Wartung allgemein Vorsätze/Feldhäcksler (Messerteller) @ 13\mod_1225453555895_78.docx @ 156385 @ @ 1
Danger! - When performing repair, maintenance or cleaning work or when making
technical modifications to the machine, drive elements may start moving (caution:
cutting discs continue to run).
Effect: Danger to life, injuries or damage to the machine.
•
Move the machine to the working position and lower it to the ground
•
Switch off the forage harvester engine and remove the ignition key.
•
Secure the forage harvester against accidental start-up and against rolling away.
•
Switch off the PTO and disengage it.
•
After the repair, maintenance, cleaning work or technical modifications are completed,
mount all protective covers and protective devices properly again.
•
Avoid skin contact with oils, greases, cleaning agents and solvents.
•
In the event of injuries or burns due to oils, cleaning agents or solvents, contact a doctor
immediately.
•
All other safety instructions must also be followed to avoid injuries and accidents.
Pos: 59.35.4 /Überschriften/Überschriften 2/F-J/Gelenkwelle @ 0\mod_1199781879794_78.docx @ 34542 @ 2 @ 1
11.2 PTO
shaft
Pos: 59.35.5 /BA/Wartung/Gelenkwelle schmieren/Abschmieren Gelenkwellen X-Disc 620 @ 337\mod_1430211329598_78.docx @ 2559749 @ @ 1
GPS00060
250 h
100 h
Fig. 47
Lubricate the universal shafts with multi-purpose grease at the intervals indicated in the figure.
Follow the operating instructions of the universal shaft manufacturer.
Pos: 59.35.6 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1