Safety
23
Pos: 17.10.1 /Überschriften/Überschriften 2/P-T/Sicherheitsroutinen @ 187\mod_1380089318480_78.docx @ 1608182 @ 2 @ 1
3.5
Safety routines
Pos: 17.10.2 /Überschriften/Überschriften 3/K-O/Maschine stillsetzen und sichern @ 190\mod_1381323544614_78.docx @ 1624780 @ 3 @ 1
3.5.1
Stopping and securing the machine
Pos: 17.10.3 /BA/Sicherheit/3. Sicherheitsroutinen/Maschine stillsetzen und sichern - Vorsätze_ALTE FORM @ 276\mod_1404804986797_78.docx @ 2076371 @ @ 1
WARNING!
Crush hazard due to movement of the machine or machine parts!
If the machine has not been shut down, the machine or machine parts may move
unintentionally. As a result, people may be seriously injured or killed.
•
Before leaving the machine: Shut down and secure the machine.
To park the machine securely:
•
Park the forage harvester with the front attachment on a stable, paved and even surface.
•
Switch off the drives and wait until coasting parts have come to a standstill.
•
Apply the parking brake.
•
Place the front attachment on the ground.
•
Switch off the engine, remove the ignition key and take it with you.
•
Switch off the main battery switch.
•
Secure the forage harvester against rolling away with wheel chocks.
Pos: 17.10.4 /Überschriften/Überschriften 3/A-E/A/Angehobene Maschine und Maschinenteile sicher unterbauen @ 190\mod_1381323662799_78.docx @ 1624809 @ 3 @ 1
3.5.2
Supporting lifted machine and machine parts securely
Pos: 17.10.5 /BA/Sicherheit/3. Sicherheitsroutinen/Angehobene Maschine und Maschinenteile sicher unterbauen Easy Flow 300 S_ALTE FORM @ 326\mod_1426056362031_78.docx @ 2505165 @ @ 1
WARNING!
Crushing hazard by movement of machine or machine parts!
If the machine is not supported safely, the machine or machine parts may roll, fall or sag. Thus
there is a risk of crushing or death.
•
Before working on or under lifted parts: Firmly support machine or machine parts:
In order to firmly support the machine or machine parts:
•
Stop and secure the machine, refer to “Stopping and Securing the Machine”.
•
Before performing work on or under raised machine parts, lower the machine parts or
secure them against lowering either mechanically by means of rigid safety support (e.g.
parking block, crane) or by means of hydraulic shut-off device (e.g. stop cock).
•
Never use materials that may yield to support the machine.
•
Never use hollow blocks or bricks to support the machine or machine parts. Hollow blocks
and bricks may break in case of permanent load.
•
Never work under the machine or machine parts that are held by a car jack.
Pos: 18 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1