manualshive.com logo in svg

Krone X-Disc 620, Original Operating Instructions, Page: 32 / 86

Share
Download
Krone X-Disc 620 Original Operating Instructions Download Page 32

Commissioning

 

 

32 

 

Pos: 45.7 /Überschriften/Überschriften 2/A-E/Anschlagpunkte @ 7\mod_1216717518036_78.docx @ 106550 @ 2 @ 1 

 

5.3 

Stop points  

Pos: 45.8 /BA/Inbetriebnahme/Vorsätze/Anschlagpunkte Gefahrhinweis @ 12\mod_1224668106422_78.docx @ 152419 @  @ 1 

 

 

Warning! - Stop and transportation equipment inadequately dimensioned. 

Effect: Danger to life, serious injuries or serious damage to the machine 
Use only adequately dimensioned stop and transportation equipment (crane, ropes)!

 

 

Pos: 45.9 /BA/Inbetriebnahme/Vorsätze/Adapterrahmen/Anschlagpunkte Bild X-Disc 620 @ 336\mod_1429869487083_78.docx @ 2556877 @  @ 1 

 

GPS00040

2x

Fig. 4 

Pos: 45.10 /BA/Inbetriebnahme/Vorsätze/Anschlagpunkte @ 12\mod_1224668047156_78.docx @ 152398 @  @ 1 

 

• 

For transporting from one place to another onsite, (e.g. loading) brace the lifting tool against 
the illustrated points. 

 

Pos: 45.11 /Überschriften/Überschriften 2/A-E/Abstellen der Maschine @ 19\mod_1238403937949_78.docx @ 215639 @ 2 @ 1 

 

5.4 Parking 

the 

machine 

Pos: 45.12 /WHB/Allgemeines/X-Disc/X-Disc 620 abstellen @ 336\mod_1429870638582_78.docx @ 2556934 @  @ 1 

 

Fig. 5 
• 

Put cutting system (1) down with moved out and secured parking supports (2) on fixed and 
level ground.  

Pos: 45.13 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for X-Disc 620























































































Reviews:

No comments