manualshive.com logo in svg

Krone X-Disc 620, Original Operating Instructions, Page: 15 / 86

Share
Download
Krone X-Disc 620 Original Operating Instructions Download Page 15

 

Safety

 

15 

 

Pos: 17.8.29 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenbereich zwischen Feldhäcksler und Vorsatzgerät @ 271\mod_1402908219526_78.docx @ 2045191 @  @ 1 

 

Danger zone between machine and front attachment 

People situated between the front attachment and forage harvester may be seriously injured or 
killed if the machine rolls away or moves. 
• 

Before working between the forage harvester and the front attachment: Shut down and 
safeguard the machine, see chapter Safety, "Shutting down and safeguarding the machine". 
This also applies to brief inspection work. Many serious accidents occur due to negligence 
and with the engine running and the machine rolling away or unsecured. 

• 

If the lifting unit has to be actuated, keep all people away from the movement area of the 
machine parts to be raised. 

 

Pos: 17.8.30 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenbereich bei eingeschaltetem Antrieb @ 176\mod_1372940161761_78.docx @ 1507966 @  @ 1 

 

Danger zone when drive switched on 

When the drive is switched on, there is a danger to life from rotating and swivelling machine 
parts. There must be nobody in the danger zone of the machine. 
• 

Before starting the machine, direct all people out of the danger zone of the machine. 

• 

If a hazardous situation arises, switch off drives and diesel engine immediately. 

 

Pos: 17.8.31 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenbereich Schnellkuppler @ 176\mod_1372945293737_78.docx @ 1508085 @  @ 1 

 

Danger zone of quick connector 

People may be caught, pulled in and seriously injured by the quick connector and the driven 
components. 
Before switching on the quick connector: 
• 

Attach all safety devices and move them into protective position. 

• 

Ensure that the selected speed and direction of rotation of the quick connector agree with 
the permitted speed and direction of rotation of the machine. 

• 

Ensure that nobody is in the danger zone of the machine or the universal shaft. 

 

Pos: 17.8.32 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for X-Disc 620























































































Reviews:

No comments