manualshive.com logo in svg

Krone X-Disc 620, Original Operating Instructions, Page: 42 / 86

Share
Download
Krone X-Disc 620 Original Operating Instructions Download Page 42

Start-up

 

 

42 

 

Pos: 47.23 /BA/Inbetriebnahme/Vorsätze/Ankuppeln/Ankuppeln Schnellkuppler Bild BiG X 480/580 X-Disc 620 @ 336\mod_1430199695593_78.docx @ 2559170 @  @ 1 

 

Fig. 18 

Pos: 47.24 /BA/Inbetriebnahme/Vorsätze/Ankuppeln/Ankuppeln Schnellkuppler BiG X 480/580 X-Disc 620 @ 337\mod_1430229314673_78.docx @ 2560569 @  @ 1 

 

• 

Check whether the coupling disc (1) of the main angular gearbox rests evenly against the 
coupling journal of the forage harvester (2). 

 

Pos: 47.25 /Überschriften/Überschriften 3/A-E/A/Abstellstützen rechts/links in Transportposition @ 15\mod_1232964423395_78.docx @ 177066 @ 3 @ 1 

 

6.2.2 

Parking supports in transport position on the right/left 

Pos: 47.26 /BA/Inbetriebnahme/Vorsätze/Ankuppeln/Ankuppeln T3 Bild X-Disc 620 @ 336\mod_1430200167062_78.docx @ 2559264 @  @ 1 

 

Fig. 19 

Pos: 47.27 /BA/Inbetriebnahme/Vorsätze/Ankuppeln/Ankuppeln T3 Text BiG X 480/580 EasyFlow 300/BV014 @ 160\mod_1365576079251_78.docx @ 1412531 @  @ 1 

 

• 

Swivel socket pin (3) of the parking supports (4) by 180° upward on both sides and pull 
them out. 

• 

Push the parking supports (4) upward and secure them with socket pins (3) in bore hole (5). 
Lock socket pin (3) downward by a rotation of 180°. 

Pos: 48 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for X-Disc 620























































































Reviews:

No comments