manualshive.com logo in svg

Krone X-Disc 620, Original Operating Instructions, Page: 18 / 86

Share
Download
Krone X-Disc 620 Original Operating Instructions Download Page 18

Safety

 

 

18 

 

Pos: 17.8.44 /Überschriften/Überschriften 3/U-Z/Verkehrssicherheit @ 187\mod_1380021550886_78.docx @ 1607192 @ 3 @ 1 

 

3.4.13 Traffic 

safety 

 

Pos: 17.8.45 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Verkehrssicherheit - Gefahren beim Fahren auf Straße und Feld (Vorsatz) @ 271\mod_1402909391410_78.docx @ 2045220 @  @ 1 

 

Dangers when driving on roads and in fields 

The mounted front attachment changes the handling characteristics of the forage harvester. The 
handling characteristics also depend on the operational state and on the ground. If the driver of 
the forage harvester does not consider changed handling characteristics, he may cause 
accidents. 
• 

Observe procedures for driving on roads and in fields, see chapter "Driving and 
transportation". 

 

Pos: 17.8.46 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Verkehrssicherheit - Maschine für die Straßenfahrt vorbereiten @ 176\mod_1373015125051_78.docx @ 1508569 @  @ 1 

 

Prepare the machine for road travel 

If the machine is not prepared properly for road travel, serious accidents may occur with traffic. 
• 

Before travelling on the road, always prepare the machine for road travel, see chapter 
Driving and transportation, "Preparations for road travel". 

 

Pos: 17.8.47 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Verkehrssicherheit - Kippgefahr @ 176\mod_1373015315156_78.docx @ 1508598 @  @ 1 

 

Danger of overturning 

The machine may overturn when driving on slopes. As a result, accidents may occur and 
people may be seriously injured or killed. The risk of overturning depends on many factors. 
• 

Observe procedures for driving, see chapter Driving and transportation. 

 

Pos: 17.8.48 /Überschriften/Überschriften 3/K-O/Maschine sicher abstellen @ 187\mod_1380021652951_78.docx @ 1607221 @ 3 @ 1 

 

3.4.14 

Parking the machine safely  

Pos: 17.8.49 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Maschine sicher abstellen @ 176\mod_1373262472095_78.docx @ 1509055 @  @ 1 

 

The parked machine may overturn. People may be crushed and killed. 
• 

Park the machine on a stable and even surface. 

• 

Before adjusting, repairing, servicing or cleaning the machine, ensure that it is securely 
positioned. If in doubt, support the machine. 

• 

In the chapter Driving and transportation note the section "Parking the machine". 

 

Pos: 17.8.50 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Maschine sicher abstellen - Unbeaufsichtigtes abstellen (Anbaugerät) @ 271\mod_1402650087789_78.docx @ 2043151 @  @ 1 

 

Unattended parking 

Adults and playing children are at risk from an inadequately secured and unattended parked 
machine. 
•  Before switching off the machine: Shut down and safeguard the machine, see chapter 
Safety, "Shutting down and safeguarding the machine". 
 

Pos: 17.8.51 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for X-Disc 620























































































Reviews:

No comments