manualshive.com logo in svg

Krone Swadro TC 680, Original Operating Instructions, Page: 89 / 138

Share
Download
Krone Swadro TC 680 Original Operating Instructions Download Page 89

 

Driving and Transport

 

89 

 

Pos: 34.10 /BA/Bedienung /SchwaderFahren im Hangbereich_Schwader @ 306\mod_1416229335569_78.docx @ 2379826 @ 2 @ 1 

 

10.2 

Driving on Slopes  

 

WARNING! 

Travelling on an incline 
As long as the machine is used transverse to slope and the outrigger arms are folded in or 
folded down, the machine may tilt. Thus there is a risk of serious injuries or death. 
• 

Never move the outrigger arms from working position to transport position or from transport 
position to working position as long as the machine is positioned across an incline. 

 

KS102325

Fig. 57 
 

Pos: 34.11 /Layout Module /----------------Leerzeile 5 Pt.-------------------- @ 120\mod_1342592918145_0.docx @ 1092566 @  @ 1 

 

 

Pos: 34.12 /Überschriften/Zwischenüberschriften/A-EBei Ausführung nachlaufende Tasträder @ 305\mod_1415614256614_78.docx @ 2370335 @  @ 1 

 

For the version with trailing guide wheels 

Pos: 34.13 /BA/Bedienung /Schwader/Nachlaufende Tasträder festsetzen, Verweis Kap. Einstellungen @ 305\mod_1415614542977_78.docx @ 2370366 @  @ 1 

 

In order to prevent the machine from drifting off when driving on the slope, the trailing guide 
wheels must be fixed, refer to chapter Settings “Fixing the Trailing Guide Wheels”. 

Pos: 34.14 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TC 680











































































































































Reviews:

No comments