Commissioning
53
Pos: 28.34 /Überschriften/Überschriften 2/K-O/K/Kreiselneigung - Grundeinstellung @ 360\mod_1439286492192_78.docx @ 2664217 @ 2 @ 1
7.7
Basic Setting of Rotor Inclination
Pos: 28.35 /BA/Erstinbetriebnahme/Schwader/Kreiselneigung einstellen - Grundeinstellung TC 680_760_Bild @ 360\mod_1439370156248_78.docx @ 2666298 @ @ 1
TC680-002
X
1
2
1
X
2
X
3
X
1
X
3
X
2
Fig. 23
Pos: 28.36 /BA/Erstinbetriebnahme/Schwader/Kreiselneigung - Grundeinstellung TC 680-760_TS 620-740_Text @ 365\mod_1441010808345_78.docx @ 2685796 @ @ 1
•
The rotor rake must be put down on level and firm ground.
•
Move rotor rake into working position. In doing so, make sure that the running direction of
the guide wheels shows in the direction of travel.
•
If necessary, drive up until the running direction of the guide wheels shows in the direction
of travel.
The rotor inclination is set via guide wheels on the chassis individually for each rotor. When
performing basic setting of rotor inclination, the tines (2) must have a certain distance X to the
ground (1). The following distances must be met when performing basic setting of rotor
inclination:
Distance
X
1
15 mm
X
2
5 mm
X
3
0 mm
Pos: 29 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1