manualshive.com logo in svg

Krone Swadro TC 680, Original Operating Instructions, Page: 26 / 138

Share
Download
Krone Swadro TC 680 Original Operating Instructions Download Page 26

Safety

 

 

26 

 

Pos: 16.13 /Überschriften/Überschriften 2/P-T/SSicherheitsaufkleber an der Maschine @ 190\mod_1381331374791_78.docx @ 1624956 @ 2 @ 1 

 

3.6 

Safety stickers on the machine  

Pos: 16.14 /Überschriften/Überschriften 3/K-O/LLage und Bedeutung der Sicherheitsaufkleber an der Maschine @ 190\mod_1381331498749_78.docx @ 1624985 @ 3 @ 1 

 

3.6.1 

Position and meaning of the safety stickers on the machine  

Pos: 16.15 /BA/Sicherheit/Schwader/Sicherheit Einführung Schwader_ohne Überschrift @ 302\mod_1413883110691_78.docx @ 2352366 @  @ 1 

 

The rotary rake is equipped with all safety devices (protective devices). However, it is not 
possible to eliminate all potential hazards on this machine as this would impair its full functional 
capability. Hazard warnings are attached to the machine in the relevant areas to warn against 
any dangers. The safety instructions are provided in the form of so-called warning pictograms. 
Important information on the position of these safety signs and what they mean is given below! 

Pos: 16.16 /BA/Sicherheit/Aufkleber/Schwader/Sicherheitsaufkleber Schwader TC 680_TC 760 Bild @ 504\mod_1497442987213_78.docx @ 3466411 @  @ 1 

L

 

 

1

2

5

SW700081_4

6

7

6

RH+LH

RH+LH

RH+LH

3

RH+LH

4

RH+LH

4*

RH+LH

8

Fig. 1  
RH = right-hand machine side / LH = left-hand machine side 

Pos: 16.17 /Layout Module /----------------Leerzeile-------------------- @ 240\mod_1395147357027_0.docx @ 1890988 @  @ 1 

 

 

Pos: 16.18 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /939/939 471 1 (1x) Bestell-Nr. @ 189\mod_1381220124664_78.docx @ 1622309 @  @ 1 

 

1) Order no. 939 471 1 (1x) 

Pos: 16.19 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /939/939 471 1 Bild/Text   Immer als ersten Sicherheitsaufkleber benutzen @ 189\mod_1381212141744_78.docx @ 1621596 @  @ 1 

L

 

 

 

 

Danger due to incorrect operation and lack of knowledge 

Incorrect operation and lack of knowledge of the machine as well 
as incorrect behaviour in hazardous situations is risking the life of 
the operator and third parties. 
• 

Before starting up the machine, read and follow the operating 
instructions and safety instructions. 

 

Pos: 16.20 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TC 680











































































































































Reviews:

No comments