Krone Swadro TC 680 Original Operating Instructions Download Page 47

Page: 47 / 138

Control and Display Elements

Pos: 26.6.1 /Überschriften/Zwischenüberschriften/A-E/Bei Variante Plus @ 360\mod_1439368214395_78.docx @ 2666056 @ @ 1

For Plus version

Pos: 26.6.2 /BA/Maschinenbeschreibung/Schwader/elektrisch-hydraulische Einkreiselaushebung Mittelschwader_Bild @ 376\mod_1442915484588_78.docx @ 2730705 @ @ 1

III

SW700087_2

Fig. 16

Pos: 26.6.3 /Layout Module /----------------Leerzeile 5 Pt.-------------------- @ 120\mod_1342592918145_0.docx @ 1092566 @ @ 1

Pos: 26.6.4 /BA/Maschinenbeschreibung/Schwader/elektrisch-hydraulische Einkreiselaushebung_Tabelle @ 360\mod_1439368263535_78.docx @ 2666116 @ @ 1

The following table explains the function of the individual

switches.

Switch

Function

1) Warning light (red)

Lit when operation panel is switched on.

2) Main switch

Switch operation panel on (1) and off (0).

3) Toggle switch (inching)

Set the working height on right rotor.

4) Toggle switch

Selects the rotor that is to be raised or lowered. The actual
movement is made via the single-action control unit.

Pos. I

Single-rotor lifting mechanism of left rotor:

The right rotor remains in its position. The left rotor
is raised or lowered.

Pos. II

Twin-rotor lifting mechanism:

Both rotors are raised or lowered.

Pos.III

Single-rotor lifting mechanism of right rotor:

The left rotor remains in its position. The right rotor
is raised or lowered.

5) Toggle switch (inching)

Set the working height on left rotor.

6) Digital display

Minimum distance to the ground = 0 – 99 = maximum
distance to the ground.

Pos: 27 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Summary of Contents for Swadro TC 680











































































































































Search results

Summary of Contents for Swadro TC 680

Reviews:

Krone Swadro TC 680, Original Operating Instructions, Page: 47 / 138

Search results

Summary of Contents for Swadro TC 680

Reviews: