Operation
66
Pos: 32.18 /Überschriften/Überschriften 3/A-E/B/Bei Variante Plus @ 360\mod_1439372182647_78.docx @ 2666578 @ 3 @ 1
9.2.3
For Plus Version
Pos: 32.19 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Auslegearme senken -elektrisch_Bild Swadro TC 680_760 @ 362\mod_1439564398575_78.docx @ 2670521 @ @ 1
SW700067_2
2
1
4
3
5
I
II
III
Fig. 35
Pos: 32.20 /BA/Bedienung /Schwader/Kreiselarme senken/hebenAuslegearme senken -elektrisch_Text Swadro TC 680_760 @ 395\mod_1446642806746_78.docx @ 2816375 @ @ 1
•
Fasten operation panel (4) in the cabin.
• Start
tractor.
•
To switch on the operation panel, move switch (3) to position 1.
•
Move switch (5) to central position (II).
•
In order to relieve the lockings (1), actuate the single-action control unit on the tractor and
pressurize the hydraulic cylinders.
•
To release the lockings (1), pull the
actuating rope (2) and keep it tensioned.
•
Set the single-action control unit (red 1+) of the tractor to float position.
•
If the rotors are in the working position, release the actuating rope (2).
•
To switch off the operation panel, move switch (3) to position 0.
•
Switch off tractor and secure it against rolling away.
Pos: 32.21 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Hinweis Kreiselarme senken ohne Einschhalten der Bedieneinheit @ 303\mod_1414414735689_78.docx @ 2358707 @ @ 1
Note
The changeover of the outrigger arms from the transport position into working position can also
be performed without the operation panel being switched on. In this case, both outrigger arms
are always activated at the same time.
Pos: 32.22 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1