manualshive.com logo in svg

Krone Swadro TC 680, Original Operating Instructions, Page: 80 / 138

Share
Download
Krone Swadro TC 680 Original Operating Instructions Download Page 80

Operation

 

 

80 

 

Pos: 32.91 /Überschriften/Überschriften 3/A-E/B/Bei Variante Plus @ 360\mod_1439372182647_78.docx @ 2666578 @ 3 @ 1 

 

9.10.3 

For Plus Version 

Pos: 32.92 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Auslegearme heben elektrisch Bild SW TC 680_760 @ 376\mod_1442922662296_78.docx @ 2731756 @  @ 1 

 

2

1

1

SW700074_2

4

3

Fig. 49 

Pos: 32.93 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Auslegearme heben elektrisch Text Swadro TC 680_TC 760 @ 361\mod_1439445720813_78.docx @ 2667615 @  @ 1 

 

• 

To switch on the operation panel, move switch (3) to position 1. 

• 

Move switch (4) to central position.  

• 

Turn on tractor. 

• 

Pull the operating cable (2) and keep it tensioned to raise the lockings (1). 

• 

Activate the single-action control unit until the rotors are raised to transport position. 

• 

Release the operating cable. 

• 

Actuate the single-action control unit until the lockings on right and left engage in the 
retaining bolt. 

• 

Move all hydraulic control units to neutral position. 

• 

Make certain via visual inspection that the retaining bolts are correctly engaged in the 
lockings (1). 

• 

To switch off operation panel, move switch (3) to position 0. 

Pos: 32.94 /BA/Bedienung /Schwader/Kreiselarme senken/heben/Hinweis Achten Sie auf die Transportverriegelung @ 77\mod_1310110710995_78.docx @ 667836 @  @ 1 

 

 

Note 

Make certain the transport locks engage correctly and the actuating rope is not tight. Perform a 
visual inspection to ensure the locks (1) have engaged correctly. 

 

Pos: 32.95 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TC 680











































































































































Reviews:

No comments