manualshive.com logo in svg

Krone Swadro TC 680, Original Operating Instructions, Page: 39 / 138

Share
Download
Krone Swadro TC 680 Original Operating Instructions Download Page 39

 

Machine Description

 

39 

 

Pos: 21.11 /Überschriften/Überschriften 2/K-O/KKennzeichnung @ 0\mod_1195564622099_78.docx @ 496 @ 2 @ 1 

 

4.2 

Identification Plate  

Pos: 21.12 /BA/Einleitung/Kennzeichnung/Schwader/Kennzeichnung Swadro TC 680_760 @ 472\mod_1472130972126_78.docx @ 3194018 @  @ 1 

 

TC680001

1

Fig. 12 
The machine data are rendered on the type plate (1). 

Pos: 21.13 /BA/Einleitung/Kennzeichnung/Angaben für Anfrage und Bestellungen_Fahrzeugident-Nr. @ 0\mod_1195565119708_78.docx @ 515 @ 2 @ 1 

 

4.3 

Information Required for Questions and Orders  

 

Type  

Year of manufacture 

 

Vehicle ID number 

 

 

 

Note 

The entire identification plate represents a legal document and should not be altered or 
rendered illegible! 

 

When asking questions concerning the machine or ordering spare parts, be sure to provide type 
designation, vehicle ID number and the year of manufacture : To ensure that these data are 
always available, we recommend that you enter them in the fields above. 
 

 

Note 

Authentic KRONE spare parts and accessories authorised by the manufacturer help to ensure 
safety. The use of spare parts, accessories and other devices which are not manufactured, 
tested or approved by KRONE will result in the revoking of the liability for damages resulting 
thereof. 

 

Pos: 23 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TC 680











































































































































Reviews:

No comments