manualshive.com logo in svg

Krone Swadro TC 680, Original Operating Instructions, Page: 27 / 138

Share
Download
Krone Swadro TC 680 Original Operating Instructions Download Page 27

 

Safety

 

27 

 

Pos: 16.21 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /939/939 100 4 (1x) Bestell-Nr. @ 198\mod_1384849800220_78.docx @ 1672274 @  @ 1 

 

2) Order no. 939 100 4 (1x) 

Pos: 16.22 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /939/939 100 4 Bild/Text @ 198\mod_1384849817642_78.docx @ 1672303 @  @ 1 

 

939 100-4

MAX.

540/

min

MAX.

200

bar

 

Danger if the maximum permitted PTO speed or the maximum 
permitted operating pressure is exceeded. 

If the maximum permitted PTO speed is exceed, parts of the 
machine may be destroyed or forcibly ejected. 
If the maximum permitted operating pressure is exceeded, 
hydraulic parts may be damaged. 
As a result, people may be receive serious or life threatening 
injuries. 
• 

Observe the permitted PTO speed. 

• 

Observe the permitted operating pressure. 

 

Pos: 16.23 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /939/939 574 0 (2x) Bestell-Nr. @ 283\mod_1407496848562_78.docx @ 2242969 @  @ 1 

 

3) Order No. 939 574 0 (2x) 

Pos: 16.24 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /939/939 574 0 Bild/Text @ 203\mod_1386060938931_78.docx @ 1698054 @  @ 1 

L

 

 

939 574-0

 

Danger from shock 

There is a danger of injury due to moving machine parts when the 
machine is running. 
• 

Move guards into protective position before start-up. 

 

Pos: 16.25 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /939/939 472 2 (2x) Bestell-Nr. @ 283\mod_1407496139786_78.docx @ 2242867 @  @ 1 

 

4) Order No. 939 472 2 (2x) 

Pos: 16.26 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /939/939 472 2 bei Ausführung hydraulische Breitenverstellung (+2) @ 302\mod_1413876787880_78.docx @ 2352275 @  @ 1 

 

*) in case of hydraulic width adjustment design (+2)  

Pos: 16.27 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /939/939 472 2 Bild/Text @ 200\mod_1385457358736_78.docx @ 1683448 @  @ 1 

 

939 472-2

 

Danger due to impact 

Risk of death due to swivelling movements of the machine. 
• 

Ensure that there is nobody in the swivel range of the 
machine. 

• 

Maintain distance from moving machine parts. 

 

Pos: 16.28 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /939/939 469 1 (2x) Bestell-Nr. @ 271\mod_1402898367602_78.docx @ 2044173 @  @ 1 

 

5) Order no. 939 469 1 (2x) 

Pos: 16.29 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /939/939 469 1 Bild/Text @ 200\mod_1385456794853_78.docx @ 1683380 @  @ 1 

 

 

Danger due to impacts or crushing 

Danger to life from machine parts folding down or lowering. 
• 

Ensure that there is nobody in the swivel range of the machine 
parts. 

• 

Maintain distance from moving machine parts. 

 

Pos: 16.30 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TC 680











































































































































Reviews:

No comments