manualshive.com logo in svg

Krone Swadro TC 680, Original Operating Instructions, Page: 18 / 138

Share
Download
Krone Swadro TC 680 Original Operating Instructions Download Page 18

Safety

 

 

18 

 

Pos: 16.9.37 /Überschriften/Überschriften 3/P-T/SSchutzvorrichtungen funktionsfähig halten @ 187\mod_1380021062004_78.docx @ 1607105 @ 3 @ 1 

 

3.4.10 

Keeping safety devices functional  

Pos: 16.9.38 /BA/Sicherheit/1. Grundlegende SicherheitshinweiseSchutzvorrichtungen funktionsfähig halten_fuer alle @ 453\mod_1464012282699_78.docx @ 3080198 @  @ 1 

 

If safety devices are missing or damaged, people may be seriously injured or killed by moving 
machine parts. 
• 

Replace damaged safety devices. 

• 

Remount dismounted safety devices and all other parts before start-up and move them to 
protective position. 

• 

If it is doubtful whether all safety devices have been correctly installed and are functional, 
have a service centre check them. 

 

Pos: 16.9.39 /Überschriften/Überschriften 3/P-T/PPersönliche Schutzausrüstungen @ 453\mod_1464013064506_78.docx @ 3080269 @ 3 @ 1 

 

3.4.11 

Personal Protective Equipment 

Pos: 16.9.40 /BA/Sicherheit/1. Grundlegende SicherheitshinweisePersönliche Schutzausrüstungen_fuer alle @ 494\mod_1488375125538_78.docx @ 3322625 @  @ 1 

 

The wearing of personal protective equipment is an important safety measure. Missing or 
unsuitable personal protective equipment increases health risks and injuries. 
Personal protective equipment is for example: 
– 

Suitable protective gloves 

– Safety 

boots 

– 

Tight-fitting protective clothing 

– Hearing 

protection 

– Protective 

goggles 

• 

Specify and provide personal protective equipment for the particular job. 

• 

Use only personal protective equipment which is in proper condition and offers effective 
protection. 

• 

Adjust personal protective equipment to the person, for example the size. 

• 

Remove unsuitable clothing and jewellery (e.g. rings, necklaces) and cover long hair with a 

hairnet. 

 

Pos: 16.9.41 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Geeignete Kleidung tragen @ 176\mod_1373011520074_78.docx @ 1508413 @  @ 1 

 

Wear suitable clothing 

Loose clothing increases the risk of it becoming caught or wrapped around rotating parts and of 
it becoming caught on protruding parts. As a result, people may be seriously injured or killed. 
• 

Wear tight-fitting clothing. 

• 

Never wear rings, chains or other items of jewellery. 

• 

Cover long hair with a hairnet. 

• 

Wear sturdy shoes or protective work boots. 

 

Pos: 16.9.42 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TC 680











































































































































Reviews:

No comments