manualshive.com logo in svg

Krone Swadro TC 680, Original Operating Instructions, Page: 81 / 138

Share
Download
Krone Swadro TC 680 Original Operating Instructions Download Page 81

 

Operation

 

81 

 

Pos: 32.96 /Überschriften/Überschriften 2/U-Z/ZZinkenschutze anbringen @ 36\mod_1263218287043_78.docx @ 338452 @ 2 @ 1 

 

9.11 

Protecting the tine tips (transport position and rotary rake switched off)  

Pos: 32.97 /BA/Bedienung /Schwader/Zinken / Zinkenarme/Zinkenschutze anbringen Bild SW TC 680_760 @ 213\mod_1389944201475_78.docx @ 1747510 @  @ 1 

 

SW700075_1

1

1

Fig. 50 

Pos: 32.98 /BA/Bedienung /Schwader/Zinken / Zinkenarme/Zinken unter 2 m  mit  Zinkenschutze sichern Text @ 36\mod_1263218917700_78.docx @ 338477 @  @ 1 

 

The tines must be fitted with guards which are positioned at less than 2 m in transport position 
or when the machine is switched off. The tine guards are located on the front supports (right 
and left side of the machine). 
• 

Raise the rotor arms into transport position. 

• 

Turn off the tractor and secure it against the possibility of rolling back. 

• 

Insert the tine guards (1) onto the tines. 

• 

Repeat this process for the other machine side. 

Pos: 32.99 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TC 680











































































































































Reviews:

No comments