Operation
85
Pos: 32.115 /Überschriften/Überschriften 3/A-E/B/Bei Ausführung mit elektrisch-hydraulischer Einkreiselaushebung @ 302\mod_1414129218204_78.docx @ 2356675 @ 3 @ 1
9.14.2
In Case of Electro-Hydraulic Single-Rotor Lifting Mechanism Design
Pos: 32.116 /BA/Bedienung /Schwader/Schwaden/Kreiselbetriebe bei Ausführung elektrische Einkreiselaushebung_Bild @ 362\mod_1439565090707_78.docx @ 2670552 @ @ 1
2
1
I
II
III
SW700096
Fig. 55
Pos: 32.117 /BA/Bedienung /Schwader/Schwaden/Kreiselbetriebe bei Ausführung elektrische Einkreiselaushebung_Text @ 361\mod_1439446938320_78.docx @ 2667646 @ @ 1
Single-rotor operation with right rotor
In order to use just the right rotor for swathing, proceed as follows:
•
Move outrigger arms into working position.
•
To switch on the operation panel, move switch (1) to position 1.
•
Move switch (2) to position (I).
•
Actuate the single-action control unit in order to raise the left rotor into headland position.
•
To switch off operation panel, move switch (1) to position 0.
Twin-rotor operation
In order to swath with both rotors, proceed as follows:
•
Move outrigger arms into working position.
•
To switch on the operation panel, move switch (1) to position 1.
•
Move switch (2) to position (II).
•
Move the single-action control unit to position (“Lowering/float position”).
•
To switch off operation panel, move switch (1) to position 0.
Single-rotor operation with left rotor
In order to use just the left rotor for swathing, proceed as follows:
•
Move outrigger arms into working position.
•
To switch on the operation panel, move switch (1) to position 1.
•
Move switch (2) to position (III).
•
Actuate the single-action control unit in order to raise the right rotor to headland position.
•
To switch off operation panel, move switch (1) to position 0.
Pos: 32.118 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1