manualshive.com logo in svg

Krone Swadro TC 680, Original Operating Instructions, Page: 116 / 138

Share
Download
Krone Swadro TC 680 Original Operating Instructions Download Page 116

Maintenance - Gearbox

 

 

116 

 

Pos: 40.45 /Überschriften/Überschriften 1/U-Z/Wartung - Getriebe @ 2\mod_1203058202823_78.docx @ 64495 @ 1 @ 1 

 

15 

Maintenance - Gearbox 

Pos: 40.46 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der grundlegenden Sicherheitshinweise alte Form @ 254\mod_1397485793575_78.docx @ 1953347 @  @ 1 

 

 

WARNING! 
If the basic safety instructions are not followed, people may be seriously injured or 
killed.  

• 

To avoid accidents, the basic safety instructions in the chapter Safety must have been 
read and followed, see chapter Safety "Basic safety instructions". 

 

Pos: 40.47 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der Sicherheitsroutinen alte Form @ 273\mod_1404117435996_78.docx @ 2058712 @  @ 1 

 

 

WARNING! 
If the safety routines are not adhered to, people may be seriously injured or killed.  

• 

To avoid accidents, the safety routines in the chapter Safety must be read and followed, 
see chapter Safety "Safety routines". 

 

Pos: 40.48 /BA/Wartung/Ölkontrolle_Wechsel/Ölkontrolle / Ölwechsel Intervall: siehe Kapitel Wartung „Wartungstabelle“ @ 134\mod_1350483605921_78.docx @ 1188115 @  @ 1 

 

Interval for oil level check and oil change: refer to chapter Maintenance “Maintenance Table” 

Pos: 40.49 /Layout Module /----------------Leerzeile 5 Pt.-------------------- @ 120\mod_1342592918145_0.docx @ 1092566 @  @ 1 

 

 

Pos: 40.50 /BA/Wartung/Ölkontrolle_Wechsel/Ölqualität /Ölmenge: siehe Kapitel Maschinenbeschreibung "Betriebsstoffe" @ 280\mod_1405427683970_78.docx @ 2152735 @  @ 1 

 

Oil quality / quantity: see "Consumables" in the Description of the machine section. 

Pos: 40.51 /Layout Module /----------------Leerzeile 5 Pt.-------------------- @ 120\mod_1342592918145_0.docx @ 1092566 @  @ 1 

 

 

Pos: 40.52 /BA/Wartung/Ölkontrolle_Wechsel/Altölentsorgung: siehe Kapitel Sicherheit „Betriebsstoffe“ @ 280\mod_1405428392269_78.docx @ 2152765 @  @ 1 

 

Used oil disposal: see chapter Safety "Consumables" 

Pos: 40.53 /Layout Module /----------------Leerzeile-------------------- @ 240\mod_1395147357027_0.docx @ 1890988 @  @ 1 

 

 

Pos: 40.54 /BA/Einstellungen/Wender/Voraussetzung - Maschine in Arbeitsstellung @ 291\mod_1410871987584_78.docx @ 2298665 @  @ 1 

 

Prerequisite: 

– 

The machine is in the working position, see "Moving the machine into the working position" 
in the Operation chapter. 

Pos: 40.55 /BA/Maschinenbeschreibung/BiG Pack/Handlungsanweisung: Maschine für Instandhaltung, Reparatur, Wartung, Einstellung vorbereiten @ 280\mod_1405426687693_78.docx @ 2152705 @  @ 1 

 

• 

Prepare the machine for servicing, repair, maintenance and adjustment work, see section 
Safety -> Safety routines "Preparing the machine for servicing, repair, maintenance and 
adjustment work". 

 

Pos: 40.56 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Swadro TC 680











































































































































Reviews:

No comments