Krone KWT 1600 Original Operating Instructions Download Page 91

Page: 91 / 96

Index

KWT 1600

Original Operating Instructions 150000169_04_en

Index

Additional equipment and spare parts ................ 14

Adjusting direction of travel ................................ 43

Adjusting the universal shaft .............................. 41

Appendix ............................................................ 89

Applicable documents .......................................... 6

Basic safety instructions ..................................... 13

Behaviour in case of voltage flashover of overhead
lines .................................................................... 21

Behaviour in dangerous situations and in case of
accidents ............................................................ 24

Car jack contact points ....................................... 86

Carrying out oil level check and oil and filter
element changes safely...................................... 26

Changing oil ....................................................... 78

Check oil level .................................................... 77

Check the screws on the tines ........................... 72

Checking hydraulic hoses .................................. 76

Checking/maintaining tyres ................................ 73

Checklist for initial operation .............................. 40

Children in danger .............................................. 14

Cleaning the machine......................................... 75

Connecting hydraulic hoses ............................... 48

Connecting machine to tractor ........................... 46

Connecting road travel lighting ........................... 49

Connecting the machine..................................... 14

Consumables ............................................... 20 , 36

Contact ................................................................. 2

Contact data of your dealer .................................. 2

Conversion table .................................................. 9

Crank handle ...................................................... 39

Cross references .................................................. 6

Damaged compressor unit ................................. 22

Damaged hydraulic hoses .................................. 22

Danger associated with welding work ................ 24

Danger resulting from damage to the machine .. 15

Danger when cornering with a machine hitched
and due to the overall width ............................... 19

Danger when driving on road and field............... 19

Danger zone between tractor and machine ....... 17

Danger zone due to trailing machine parts......... 18

Danger zone ejected objects .............................. 17

Danger zone PTO shaft...................................... 17

Danger zone universal shaft............................... 17

Danger zone when drive is switched on ............. 17

Danger zones ..................................................... 16

Dangers arising from environment ..................... 21

Dangers for road travel....................................... 19

Dangers if the machine is not prepared properly for
road travel .......................................................... 19

Dangers in connection with certain activities:
Working on the machine..................................... 23

Dangers in connection with certain activities:
working on wheels and tyres .............................. 24

Dangers when operating the machine on slopes 20

Declaration of conformity.................................... 95

Deflector curtain from transport to working position:

........................................................................... 56

Deflector curtain from working to transport position

........................................................................... 59

Directories and references ................................... 6

Driving and transport .......................................... 61

Ensuring functionality of safety devices ............. 18

Environmental protection and disposal .............. 20

Summary of Contents for KWT 1600

































































































Search results

Summary of Contents for KWT 1600

Reviews:

Krone KWT 1600, Original Operating Instructions, Page: 91 / 96

Search results

Summary of Contents for KWT 1600

Reviews: