manualshive.com logo in svg

Krone KWT 1600, Original Operating Instructions, Page: 55 / 96

Share
Download
Krone KWT 1600 Original Operating Instructions Download Page 55

Operation

8

Lowering machine from transport to working position

8.6

KWT 1600

Original Operating Instructions 150000169_04_en

55

8.6

Lowering machine from transport to working position

 WARNING

Danger to life, injuries or damage to the machine due to uncontrolled lowering of the
machine

When lowering the machine into the working position, people or animals in the swivel range
may be seriously injured and the machine may be damaged.

„

Lower the machine only when you are absolutely sure that there are no persons, animals
or objects in the swivel range of the machine.

„

Only switch on the PTO shaft when the machine is in the working position.

KW000-045

Attach the outer wheels (1) under the rotors in the same position as the other wheels.

„

Remove the linch pin (3).

„

Pull out the bolt (4).

„

Swivel the outer wheels (1) into the same borehole of the axle support (2) as the other
wheels.

„

Push the bolt (4) in and secure it with the linch pin (3).

„

Open the stop cocks on the hydraulic hoses.

Summary of Contents for KWT 1600

































































































Reviews:

No comments