Krone KWT 1600, Original Operating Instructions, Page: 74 / 96

11 Maintenance – General
11.4 Checking/maintaining tyres
74
KWT 1600
Original Operating Instructions 150000169_04_en
Checking/adapting the tyre pressure
„
Check the tyre pressure, refer to page 37 .
Æ If the tyre pressure is too high, deflate air.
Æ
If the tyre pressure is too low, increase the tyre pressure.
Check the maintenance intervals for tyre pressure, refer to page 68 .
Retighten wheel nuts
For the version "without brake"
DVG000-002
„ Retighten the wheel nuts crosswise (as shown) with a torque wrench, tightening torque refer
to page 74 .
Maintanance intervals, refer to page 68 .
Tightening torque: wheel nuts
Thread Key size Amount of bolts
per hub Maximum tightening torque
black galvanised
M12x1.5 19 mm 4/5 units 95 Nm 95 Nm
M14x1.5 22 mm 5 units 125 Nm 125 Nm
M18x1.5 24 mm 6 units 290 Nm 320 Nm
M20x1.5 27 mm 8 units 380 Nm 420 Nm
M20x1.5 30 mm 8 units 380 Nm 420 Nm
M22x1.5 32 mm 8/10 units 510 Nm 560 Nm
M22x2 32 mm 10 units 460 Nm 505 Nm