Initial operation
6
Adjusting direction of travel
6.5
KWT 1600
Original Operating Instructions 150000169_04_en
43
6.5
Adjusting direction of travel
KW000-085
The steering linkage has been pre-adjusted in the factory.
Straight-ahead travel must be checked for the hitched machine. On a level street, the machine
must run in the centre behind the tractor.
The steering linkage must be readjusted if the machine runs diagonally to the tractor.
If the machine is not running in the centre behind the tractor on a level street, this can be
controlled by adjusting the steering linkage (2).
Setting work on the steering must only be performed by qualified personnel,
.
Loosen the counter nut (1).
Adjust the steering linkage (2).
If the machine is running too far to the right, shorten the steering rod.
If the machine is running too far to the left, lengthen the steering rod.
Tighten the counter nut (1).
6.6
Set the fold-in height of the outrigger arms.
KW000-076
In order to set the height of the outrigger arms when folding in and out, the cam disc on the
carrying bar is adjusted.
The height when folding in the outrigger arms is set in the centre in the factory.
Loosen the screw (2).
In order to increase the height when folding in the outrigger arms, adjust the cam disc (1) in
the direction "+".
In order to reduce the height when folding in the outrigger arms, adjust the cam disc (1) in
the direction "-".
Tighten the screw (2).