Krone KWT 1600 Original Operating Instructions Download Page 65 | Manualshive

Page: 65 / 96

Krone KWT 1600 Original Operating Instructions Download Page 65

Settings

10

Setting the spreading angle of the rotors

10.1

KWT 1600

Original Operating Instructions 150000169_04_en

65

10

Settings

WARNING

Risk of injury due to non-observance of relevant safety notices

If the relevant safety notices are not observed, persons may get seriously injured or killed.

To avoid accidents, the basic safety instructions must be read and observed,

WARNING

Risk of injury due to non-observance of safety instructions

If the relevant safety routines are not observed, persons may be seriously injured or killed.

The safety routines must be read and observed to avoid accidents,

refer to page 25

.

10.1

Setting the spreading angle of the rotors

INFORMATION

The setting must be made on the running wheels of the machine.

ü

The machine is in the working position.

ü

The stop cocks on the hydraulic hoses are closed.

Shut down and safeguard the machine,

refer to page 25

KW000-054

The spreading angle of the rotor tines must be adjusted to the situation of the ground and the
forage. The spreading angle can be set in 4 steps from flat to steep. The following reference
points are specified for selecting the spreading angle according to the harvesting conditions:

Steepest spreading angle (I)

•

Long discharge distance

•

Long crops

•

Better discharge effect for mown swaths

•

Wilted silage

•

Forage with more than 40% moisture content

«
...
63
64
65
66
67
...
»

Summary of Contents for KWT 1600

































































































Reviews:

No comments