Krone KWT 1600, Original Operating Instructions, Page: 57 / 96

Operation 8
Field mode on slopes 8.8
KWT 1600
Original Operating Instructions 150000169_04_en 57
The double-acting control unit (1+/1-) is used to move the deflector curtain (3) to the working
position or transport position.
The deflector curtain is used to limit border spreading.
KW000-040
„
To switch on the operation panel, set the main switch (1) from position "0" to position "1".
„
Actuate the double-acting control unit (1+) until the deflector curtain (3) is fully folded out.
„
To switch off the operation panel, set the main switch (1) from position "1" to position "0".
8.8 Field mode on slopes
WARNING
Risk of injury due to non-observance of relevant safety notices
If the relevant safety notices are not observed, persons may get seriously injured or killed.
„
To avoid accidents, the basic safety instructions must be read and observed, refer to
page 13 .
KWG000-012
„ Do not move the machine from transport into working position or from working into transport
position as long as the machine is operated diagonal to the slope.