Krone KWT 1600, Original Operating Instructions, Page: 68 / 96

11 Maintenance – General
11.1 Maintenance table
68
KWT 1600
Original Operating Instructions 150000169_04_en
11 Maintenance – General
WARNING
Risk of injury due to non-observance of relevant safety notices
If the relevant safety notices are not observed, persons may get seriously injured or killed.
„
To avoid accidents, the basic safety instructions must be read and observed, refer to
page 13 .
WARNING
Risk of injury due to non-observance of safety instructions
If the relevant safety routines are not observed, persons may be seriously injured or killed.
„ The safety routines must be read and observed to avoid accidents, refer to page 25 .
11.1 Maintenance table
11.1.1 Maintenance – Before the season
Components
Tighten screws/nuts refer to page 69
Retightening wheel nuts refer to page 74
Check tyre pressure refer to page 74
Visually inspect tyres for cuts and breaks refer to page 73
Check the hydraulic hoses for leaks and, if ne-
cessary, have them replaced by a KRONE
service partner. refer to page 76
Check the electrical connection cables and, if
necessary, have them repaired or changed by
a KRONE service partner
Checking/setting all the machine settings refer to page 65
11.1.2 Maintenance – After the season
Components
Clean the machine refer to page 75
Lubricate the machine according to the lubric-
ation chart refer to page 80
Lubricate the universal shaft refer to page 79
Release the springs
Grease the threads of the setting screws
Grease the uncoated piston rods of all hy-
draulic cylinders and insert as far as possible
Lightly coat with oil all those lever joints and
bearing positions which cannot be lubricated