Krone KWT 1600, Original Operating Instructions, Page: 23 / 96

Safety 2
Basic safety instructions 2.4
KWT 1600
Original Operating Instructions 150000169_04_en 23
2.4.19 Dangers in connection with certain activities: Working on the machine
Only perform work when the machine is at standstill
If the machine is not shut down and safeguarded, parts may move unintentionally or the
machine may start moving. Thus there is a risk of serious injuries or death.
„
Before carrying out any repair, maintenance and cleaning work on the machine, shutdown
and safeguard it,
refer to page 25 .
Maintenance and repair work
Improper maintenance and repair work endanger operational safety. Thus there is a risk of
accidents, serious injuries or death.
„ Only perform work which is described in this operating instructions. Prior to any work, stop
and safeguard the machine,
refer to page 25 .
„ All other maintenance and repair work must only be performed by qualified specialist
workshop.
Working at or on heights of the machine
There is a risk of falling when working at or on heights of the machine. As a result, accidents
may occur and people may be seriously or fatally injured.
„
Prior to any work, stop and safeguard the machine, refer to page 25 .
„ Make sure you stand securely.
„
Use a suitable fall protection.
„
Secure the area below the assembly point against falling objects.
Raised machine and machine parts
The raised machine and machine parts may fall or tilt unintentionally. People may be seriously
injured or killed, as a result.
„
Do not stay under the raised machine or machine parts which are not safely supported, refer
to page 25 .
„ Prior to all work on raised machines or machine parts, lower the machine or machine parts.
„
Before performing any work under raised machines or machine parts, secure the machine or
machine parts with rigid safety support or with hydraulic shut-off device or by supporting
against lowering.