
16
Repairs, maintenance and settings by technicians
16.1
Car jack contact points
86
KWT 1600
Original Operating Instructions 150000169_04_en
16
Repairs, maintenance and settings by technicians
WARNING
Risk of injury or damage to the machine due to incorrect repair, maintenance and
setting work.
Machines that are not repaired, maintained or set by technicians can exhibit faults caused by
a lack of knowledge. As a result, people may be seriously injured or killed.
Only an authorised technician may carry out repair, maintenance and setting work at the
machine.
Observe the qualification of technicians,
WARNING
Risk of injury due to non-observance of relevant safety notices
If the relevant safety notices are not observed, persons may get seriously injured or killed.
To avoid accidents, the basic safety instructions must be read and observed,
WARNING
Risk of injury due to non-observance of safety instructions
If the relevant safety routines are not observed, persons may be seriously injured or killed.
The safety routines must be read and observed to avoid accidents,
.
This chapter describes repair, maintenance and adjustment work on the machine which may be
performed by qualified technicians only. The chapter "Personnel qualification of the technicians"
must be read and observed in full,
.
16.1
Car jack contact points
WARNING
Risk of injury due to raised machine
There is a risk to individuals from the machine falling and parts which are swinging in an
uncontrolled manner.
Use only permitted hoists and slings with a sufficient load-bearing capacity. For the
weights, see type plate of the machine.
Note the information on the suspension points provided.
Make sure the lifting means are properly secured.
Never stay under the suspended machine.
If work has to be performed under the machine, securely support the machine,