Operation
8
Deflector curtain from working to transport position
8.10
KWT 1600
Original Operating Instructions 150000169_04_en
59
Objective for fast drying
The objective of a working step with the tedder is an even spreading pattern. The forage should
be arranged as an even layer behind the tedder.
If swaths are to be formed during tedding:
increase the rotational speed for swath forming between backwards rotating tines (A),
reduce the rotational speed for swath forming between forwards rotating tines (B).
8.10
Deflector curtain from working to transport position
With "deflector curtain" version
From working to transport position
KW000-040
To switch on the operation panel, set the main switch (1) from position "0" to position "1".
Actuate the double-acting control unit (1-) until the deflector curtain (3) is fully folded in.
To switch off the operation panel, set the main switch (1) from position "1" to position "0".
8.11
Raising machine from working to transport position
WARNING
Risk of accidents due to raising the outrigger arms into transport position
While the outrigger arms are being raised into transport position, people may be caught and
be seriously injured.
Before raising the outrigger arms into transport position, switch off the PTO shaft and wait
until the rotors have come to a stop.
Do not raise the outrigger arms until everybody is outside the swivel range.