KROHNE OPTISONIC 6400, Handbook

Page: 59 / 84

OPERATION
5
59
OPTISONIC 6400
www.krohne.com 08/2011 - 4000972602 - MA OPTISONIC 6400 R02 en
Menu 3: View logged data
2 Pulse width
3 Maximum pulse rate
4 Measurement Selection from list
1
5 Pulse value unit Selection from list
6 Value per pulse
7 Polarity Selection from list
8 Low flow cutoff threshold
9 Low flow cutoff
hysteresis
10 Time constant
11 Invert signal Selection from list
5 Simulation
1 Output Selection from list
2 Set simulation value
6 Counters
1 Counter 1
1 Function of counter Selection from list
2 Measurement Selection from list
1
3 Low flow cutoff treshold
4 Low flow cutoff
hysteresis
5 Preset value
6 Reset counter Selection from list
7 Set counter
1 Value
2 Set counter Selection from list
8 Stop counter Selection from list
9 Start counter Selection from list
2 Counter 2 Same as "Counter 1"
3 Counter 3 Same as "Counter 1"
4 Counter 4 Same as "Counter 1"
7 Reset errors Selection from list
1
Items shown are dependent on settings in other menu items, e.g. 1 pipe / 2 pipes, 1 path / 2 paths, energy on / off, flow
calculation on / off etc.
Menu nr Menu item Remarks
3 View logged data
1 Select log file
2 Select parameter configured list
3 (Range setting)
1 Offset
2 Limit
Menu nr Menu item Remarks