INSTALLATION
3
23
OPTISONIC 6400
www.krohne.com
08/2011 - 4000972602 - MA OPTISONIC 6400 R02 en
Z mode; 2 rails (DN400...1500)
Measure the outer diameter of the pipe with the measuring band. Install the DOWN rail at the
opposite location of the pipe.
•
Mount the DOWN rail in such a way that the transducer is at the marked location.
W mode; 1 rail (DN15...150)
Follow the instructions as given in "V mode; 1 rail
V mode; 1 rail
V mode; 1 rail
V mode; 1 rail".
Figure 3-10: Mounting second rail in Z mode (1 traverse) using a reference point
1
Measure the distance between the transducer of the UP rail and the reference point.
2
Add the advised distance to determine the position of the second transducer.
Figure 3-11: Mounting second rail in Z mode (1 traverse) without using a reference point
1
Advised distance
1
=
2
+
3
