KROHNE OPTISONIC 6400, Handbook

Page: 61 / 84

OPERATION
5
61
OPTISONIC 6400
www.krohne.com 08/2011 - 4000972602 - MA OPTISONIC 6400 R02 en
3 Electronic serial number
2 Components
1 Device
2 Sensor CPU Same as "Device"
3 Sensor DSP Same as "Device"
4 Sensor driver Same as "Device"
5 Current output Same as "Device"
6 Current input A Same as "Device"
7 Current input B Same as "Device"
8 UI controller Same as "Device"
3 Operating hours
5 Service These settings are specific for the
ultrasonic measurement operation.
Changing service settings may affect
proper operation of the instrument.
It is advised that changing of these
parameters is performed by qualified
engineers only.
1 Signal data
1 Signal path 1 Selection from list
2 Signal path 2 Selection from list
3 Window path 1
1 Method Selection from list
2 Window size
3 Window weight
4 Window minimum
5 Window start
6 Window end
4 Window path 2 Same as "Window path 1"
5 Detection path 1
1 Method Selection from list
2 Trigger level
3 Trigger margin
4 Dead time
6 Detection path 2 Same as "Detection path 1"
2 Service calibration
1 zero device
1 path 1
2 path 2
2 zero converter
1 path 1
2 path 2
3 Reset to defaults Selection from list
Menu number Menu item Remarks