Kramer Electronics Ltd.
VS-622DT
– Using the Web Pages
20
▪
Check
Out1
and/or
Out2
to set the current input to route to OUT 1, OUT 2 or both
outputs.
These settings are per input and remain valid even if a remote
DIP-30
is exchanged for
another
DIP-30
.
For each button you can activate Echo, Out 1 and Out 2 simultaneously.
Switching a Pattern to the Outputs
You can switch a selected pattern to the outputs.
To switch a selected pattern to the outputs:
1. In the Navigation pane, click
Routing
. The Routing page appears.
2. Click the
Video
tab. Verify that
Patterns
(and not
Inputs
) is selected.
The list of patterns appears.
3. Click a pattern.
The selected pattern is switched to both output/s (for example, pattern 1 is switched to
outputs 1 and 2).
Figure 16: Routing Page
– Switching a Pattern to the Outputs